Home > Leak Detection

Leading Leak Detection System Expert For Water & Oil

CtrlTech Dubai is a leak detection services company near you. They supply pinpoint leakage testing devices with sensors for pipelines in Abu Dhabi.

What is it?

Leak Detection

Leak detection is a technique by which any type of leakage is detected at a very early stage. The device that helps to sense it is known as a leak detection system. It is a small, low-cost, potent equipment that can avoid heavy losses. The objective of this page is to explain to users all aspects of leak alarm devices, including their benefits, working, types, components, and applications. CtrlTech leak detection Dubai offers reliable solutions for every application.

On many occasions, designers and architects ignore the installation of leak detection devices. Our discussion here is limited to liquid leakages, especially water and oil. These two are precious natural resources, and any leak of these fluids can cause dangerous consequences. It can be the root cause of a vast issue, including financial and life loss. Indeed, fixing this low-priced leak detection equipment will give you peace of mind.

Leak Detection
Want to know more about Water Leak Detection System?

Contact Us Now!

+971 6 5489626

What are the types of Leak Detection Systems?

Based on working principles, there are two main types of leak detection equipment. The first is flow-based, and the second is sensor-based units. A flow-based system monitors the liquid's volume and time passing through the pipes. When there is a burst or fault, the volume and flow speed of the liquid increase, and it is detected as a leak when it is more than the threshold set for every pipe size. Hence, the system will automatically close the valve to stop the liquid flow and initiate audible alarms and notifications.

A sensor-based leakage detection system consists of a central monitoring panel connected with the suitable sensor types.

These leak sensors are installed in areas that need to be protected. When leaked liquid touches the sensors, it creates a short circuit condition, and the panel triggers the alarm. These panels also provide NO/NC relay output, which is used to switch valves installed in the main pipelines to stop the water flow.

The main difference between these two systems is that the flow type unit is directly installed in series with the pipeline. In contrast, we can fix sensor-type devices anywhere. The leak detection services company often uses both types of systems.

Oil and Water Leak Detection Unit

There are two types of units based on the type of fluid the leak detection panel is designed. The leak prevention devices are predominantly used for water and oil. In this section, we will discuss both sensor systems that are commonly used in technical areas.

Categories

Categories of Leak Detection

At CTRL Technologies, we provide many types of solutions for your water leakage problems. Each solution is made as per your need. Explore the various categories of leak detection that exist in our surroundings.

Water Leak Detection

Water Leak Detection

Imagine that you are on your family holiday, and you get a call from your neighbor about a water leak at your home or, you are a data center facility manager who finds the whole server room in the water the following day when he visits it. For that matter, a water pump malfunctioning can cause a flood in your pump room. Hence, every critical facility needs a pinpoint leak detection system to get early notification about the leak at an early stage. Nowadays, WiFi water leak detectors are available, eliminating physical wiring between the panel and the sensors.

CtrlTech is a reputed water leak detection company in UAE. They offer distance read, single zone, and multizone water alarm systems. American RLE and Aqualeak UK are some of the brands they represent exclusively...

Know More
Oil leak Detection

Oil Leak Detection

Oil is not only an expensive commodity, but it is also inflammable. Any unwanted oil discharge at petrol pumps, oil pipelines, Generator rooms, or commercial fuel tanks will lead to losses and fatal accidents. In addition, it can create an environmental hazard when it bleeds in the seawater by destroying whole marine life. Thus, an efficient oil leak detection system is an avoidable requirement of any oil facility. This system also has probe and wire leak sensors. Audio, email, and SMS notify of any fault and detect alarms.

Oil is the backbone of the Middle Eastern and European economies. Oil is delivered to countries through an extended network of metal pipes. Thus, a leak detection system for the pipeline is crucial for safety and efficiency. It can locate the squirt's exact point, making the repair job easy and faster.

Know More
Leak Detector

Leak Detector

Water leak detectors are essential sensors that detect water presence, triggering alerts via a detection system panel. This article explores various types of water detectors and their applications, including smart, WiFi, ultrasonic, and infrared sensors.

Probes and water-sensing cables are popular and cost-effective options. However, the selection depends on the application's criticality. Standalone detectors are suitable for residential use and can be monitored via mobile apps.

In contrast, commercial buildings, pump rooms, data centers, and server rooms require reliable detectors integrated into a comprehensive system. This overview highlights the importance of choosing the right water leak detector sensor for different environments and applications.

Know More

Types of Leak Detection Panels

Any sensor-based leak detection system mainly consists of two parts: a central panel and leak sensors. These panels determine the features of the whole system. A simple water leakage inspection panel has only a fault indication. At the same time, a high-end unit will have an LCD, RJ45 terminal to connect to the network, NO/NC relay contact to connect to the BMS, and terminals to connect different types of sensors, including temperature, humidity, power failure, and access control. It is also generally fitted with LED indications for faults, cable breaks, and leaks. Some systems have an inbuilt audio buzzer with a button to silence it.

Depending on different capabilities, features, and accuracy of pointing leak location, the panels are mainly three types; a distance read or locating, zone or multizone, and WiFi type.

Pinpoint leak detection
Pinpoint Leak Detection

It is also reefed as a distance read or locating leak locator system. As the name suggests, these panels can notify the exact location of the sensor cable's length where the drip has been detected without any error. Hence, one can immediately take corrective action without losing time. These systems are helpful in critical facilities like server rooms, data centers, telecom rooms, and labs.

The panel's LCD shows the leak location in feet or meters. To elaborate, suppose a system is installed with a 500-meter sensor cable. If the leaked liquid touches the cable at the 205th meter, the LCD panel will notify the leak alarm and display 205 meters on it. The pinpoint systems are compatible with only cable leak detection sensors. It is the best leak detection alarm type of all.

Zone Leak Detection System

Unlike a locating type system, a zone-based system can not notify the exact leak location. Instead, it will inform the zone where the liquid spill is found. Hence, users need to check the whole area to repair it, and response time increases. These panels are compatible with wire, probe, and spot leak detection sensors. Also, these panels are available in the multizone configuration. It can monitor many areas at the same time.

A zonal system is a basic leak detection technology suitable for less critical places. Every zone is connected to its sensors. The panel has separate LED indications for leaks and cable faults for each zone. When the leak is detected in a particular space, the LED of that peculiar zone gets illuminated. However, it is a cost-effective unit for elevator pith, water tanks, and small server rooms.

Multi zone leakage detection system
Wireless leak detection panel
Wireless Leak Detector

For small facilities, it is easy to connect sensors through physical wires to the central panel. But for large and complex existing sites, wiring will be difficult. Also, any damage or cuts to these wires will stop the sensor from working. A WiFi leak detection system solves all these obstacles and offers a robust working system. Installation of this unit is hassle-free. We can relocate sensors quickly as per the site requirements.

This electronic leak detection unit consists of a central wireless panel and sensors. The main console can communicate with the sensor even through wall obstacles. Sensors are available for water leaks, temperature monitoring, humidity monitoring, and motion sensing. Also, it can be a combination of wire and spot types. Users can use an extender to increase the wireless range up to 1000 feet.

Types of Leak Sensors

Sensors are the backbone of leak detection systems. They are a component that first detects the presence of liquid and communicates it to the central panel. Based on this notification, the leak detection panel triggers alarms, relays, and notifications. There are many types of leak sensors. Here, we will discuss liquid detectors and water sensors. There are the following types of systems.

Water Leak Sensor Cable

Water Leak Sensor Cable

This sensor is available in flexible wire. Depending on the application, a cable water sensor is installed on the periphery or laid down in the ZikZak manner. This water-sensing cable is connected to the panel with the help of four core control cables, known as the Leader Cable. A wire leak sensor is led on the floor using stickable 'J'- shaped clips.

The high density of this wired water leak sensor increases the probability of touching leaked water to the detector. A four-core cable also helps the board determine the leak's length using resistance. When liquid touches this water leak cable, its core gets shorted, and the panel gets single.

Point or probe sensors

Point or Probe Sensors

Probe sensors are a cost-effective solution for monitoring leaks in small spaces. The point leak detection sensor is available in different formats. The most common is with fixable legs connected to the central panel. It consists of two conducting electrodes with a tiny gap. The height of these electrodes can be adjusted from the ground.

When leaked liquid passes below this water alarm sensor, it shorts two electrodes. Thus, a leak signal is sent to the panel, which generates an alarm. This product is suitable for drip trays below ACs, water trenches, or outdoor cabinets.

Wifi Sensors

WiFi Sensors

A wireless leak sensor is a module that facilitates communication between a leak detection panel and sensors without a wire connection. Since it eliminates wiring, it is easy to install, configure, and relocate. Users can choose a cable probe or a combination of both types of units and these modules. Also, it runs on batteries and does not need an electrical supply. Battery life is up to 12 years.

Each unit is provided with Web interface software. Users can connect 250 to 400 sensing devices. This system is ideal for a large data center or oil field with many tanks. It can also make pipeline leak detection very easy.

Why does a leak happen?

There can be several reasons for leakages. Some of the common causes are as follows:

  1. A sudden increase in water pressure can cause the bursting of pipes.
  2. Corrosion of metal tubes or aging can create damages that lead to liquid spilling.
  3. Damage to water heaters or cooling pipes.
  4. In data centers, potential water leakage is from the precision air conditioners. Precision ACs need drain and water supply connections. And if it is a chilled water type, there is always the threat of a leak.
  5. In a commercial building, pump malfunctioning can cause flooding in the pump rooms.

Any leakage can be avoided by regular preventive maintenance of the facility. But, for more safety leak detection unit is a must to detect it with speed and avoid losses.

Leak Detection Methods

There are many different methods of leak detection in fluid-carrying setups. Spilling of liquid can happen due to faults in pipes, pumps, valves, and ACs. The job of the leakage detection system is to find dripping fast and notify it with speed. Depending on the material or agent used, there are different techniques.

Some of the primary methods are as follows.

1. Electronic Leak Detector: This type of unit includes a system that uses sensors and electronic cards to detect fluid and send notifications. It is faster, automatic, durable, and more affordable than other methods. Hence, it is used inside commercial buildings, IT rooms, and laboratories.

2. Acoustic Leak Detection System Every leak produces sound depending on its volume and the material from which it is leaking. Acoustic systems use sound waves for leak detection in pipelines. When this system moves over underground pipes, a highly sensitive transducer causes the sound of flowing fluids.

Depending on the loudness of these sounds, the leak location is determined. It is the best method for underground water leak detection.

3. Fluorescent System: This method uses leak detection dye. A fluorescent dye is mixed with the liquid flowing in the pipe. The leak location will illuminate when an ultraviolet flashlight moves over the line.

4. Gas Leak Detection: Different types of gases are used to find leakage in the closed-loop system. Gases released in the closed-ended pipe try to escape from the holes, which helps to locate the leaking point.

px
Applications

Where Leak Detection System Is Used?

Leak detection systems play a big role in different cases. From industrial setups like pump rooms and gas pipes to homes, they protect against possible danger and keep people safe.

Pump Rooms

Pump Rooms

Finding leaks to stop floods, tool damage, and possible dangers. This gives continuous working and safety to people.

Gas Pipes

Gas Pipes

Early finding of leaks stops fire from happening. It also saves people from health problems to keep up good health.

Generator Rooms

Generator Rooms

Protects from fuel leaks to keep the generator working. It also saves failure and decreases safety dangers.

Fuel Tanks

Fuel Tanks

Find leaks to stop loss of fuel, damage to the environment, and possible danger. This gives good quality work and safety.

Oil Pipes

Oil Pipes

Early detection stops the chances of leaks This saves the environment from damage and keeps up the continued oil supply.

Homes

Homes

Saves homes from water leaks, germs growth, and weak structures to properly protect people and good living.

Video

Leak Detection video

FAQs Of Leak Detection

There are different methods available for detecting leakages. One of the most proactive and fast methods is to install a sensor-based leak detection system. In case of a leak, this system generates an alarm, email, or SMS notification and displays the exact location of the leakage. An acoustic and ultrasonic system detects the sound of underground pipe leak findings due to liquid or gas released from damaged pipes.

A sensor-based leak detection system is the most effective one. Any effective leak detection system should be proactive, and it should detect and notify with speed. Thus, the system with sensors is the most worthwhile. As soon as dripping happens, it generates an alarm so that users can take action immediately.

Yes, a leak detection system is essential for any facility to avoid financial and human loss.

  1. It notifies leaks at a very early stage and hence minimizes losses.
  2. It can also automatically switch off the main supply pipe once the leak is detected.
  3. By avoiding damages, this system avoids business interruption and increases productivity.
  4. Since it reveals cracks quickly, it avoids the wastage of essential resources like water, oil, and natural gases.
  5. An oil spill can create life-threatening situations. Similarly, water dripping can create an unhealthy environment since it can give rise to the formation of mold and fungus.
  6. The absence of a leak detection system can lead you to pay more property insurance premiums.

A leak detection alarm is a device that senses a leak of liquid with the help of its sensors at an initial stage and informs the users with speed so that users can take corrective action to avoid damage. In some cases, it can notify the exact location of the water detection, and also it can switch off the valve in the main supply pipe.

Depending on the features, a leak detector is available for the cost of AED 900. The price of a leak detection system also depends on the number or length of the sensor. A single zone panel with a basic audible alarm is the cheapest panel. A Multizone system will be comparatively costly. A distance read leakage detection is the most expensive of all. The option of notification and remote monitoring also determines the pricing.

A leak detection system is a device that notifies the liquid leakage with the help of its sensors.

A leak detection system is often used in pump rooms, commercial buildings, telecom rooms, and labs. These systems can notify users by an audio alarm, Email, & SMS. Similarly, an oil leakage detection system is essential for generator rooms, fuel tanks, and oil pipelines. With the help of a wire leak detection sensor, this system can locate the exact location of the leakage.

To know more about leak detection services and companies,

Get in Touch

For More Enquiry

Call us at +971 6 5489626
Email Us at sales@ctrltechnologies.com